Vir-Clean is an blend of glutaraldehyde and 4 quaternary ammoniums in an aqueous solution.
As the active ingredients are resistant to heat or light, Vir-Clean remains effective up to 15 days after application.
Vir-Clean is highly effective against a wide range of micro-organisms. Extensive laboratory and field tests have demonstrated its properties against the main viruses and bacteria (Equine Herpes Virus EHV4 EHV1, Orthomyxovirus H1N1 H5N1, Parvovirus, Salmonella Sp, E. Coli, Clostridia Sp, Streptococcus Equi, MRSA, Coronavirus SARS MERS, Aspergillus Niger, Candida Albicans, Ringworm, Paramedicovirus (canine squamous cell disease), Canine parvovirus, Feline parvovirus, Calicivirus, etc ......).
Its broad spectrum activity guarantees animal health and an optimal level of hygiene.
Vir-Clean is used for the treatment of domestic animal housing (stables, barns, henhouses, kennels, hutches, etc.), transport and breeding equipment for domestic animals. Disease prevention are improved by eliminating micro-organisms (viruses, bacteria, fungi) that are invisible to the naked eye.
Vir-Clean is a terminal disinfectant for use on surfaces that have been cleaned of heavy contaminants and then flushed..
Virucide activity: diluted to 2% (i.e. 20 ml per litre of water) in 15 to 30 minutes. Bactericide activity: diluted to 0.75% (i.e. 7.5 ml per litre of water) in 5 minutes. Fungicide activity: diluted by 4% (i.e. 40 ml per litre of water) in 15 minutes. Liquid disinfectant TP3 ( biocide product for veterinary hygiene) and TP4 (disinfection for surfaces in contact with foodstuffs)
Bactericide according to standards T72-301, EN 1276, EN 1656, EN 13697 and NFT 72-281.
Fungicidal according to standards T72-300, EN 1650 and EN 13697.
Virucide on vertebrate viruses according to NTF 72-180.
Product complies with the legislation on cleaning products for equipment that may come into contact with foodstuffs (decree of 08.09.1999). Approval of the Ministry of Agriculture n°201057. 
alkyl dimethyl benzyl ammonium chloride CAS No 68424-85-1 8% 
tetrasodium ethylenediaminetetraacetate CAS No 64-02-8 1% 
didecyldimethylammonium chloride CAS No. 7173-51-5 1.5 %
glutaraldehyde CAS No 111-30-8 15% 
d-limonene N°CAS 5989-27-5 0.1% to 1%.
Remove animals. Remove any residues, debris and dirt. Apply the solution. Allow to work and reintroduce animals only after complete drying.
Use by spraying walls, floors and large equipment, soaking small equipment and by heat fogging.
Several levels of dilution according to use:
- Bactericide at 0.75% (5 minutes) AFNOR Standard T72-30 (7.5 ml for 1 litre) - Fungicide at 4% (15 minutes) Standard T72-301 (40 ml for 1 litre)
- 2% virucide (30 minutes) AFNOR NFT 72-180 standard (20 ml for 1 litre)
- Thermal fogging: for a bactericidal dose of 2.4 ml/m3 for 4 hours of contact - Standard NFT 72281 - Application without human and/or animal presence.
- Use with bleach for any treatment: add 20 to 25 kg of neutral white for 100 L of solution.
Handling and storage :
Wear suitable protective clothing, gloves and eye mask if necessary. Avoid contact with the eyes. 
Vir-Clean concentrate, even when diluted, can be stored in an airtight container for 12 months.
Full recommendations on the handling and disposal of this product are provided in a separate Safety Data Sheet (SDS). 
Do not spray in the presence of animals. Do not spray in the presence of food. Contains Glutaraldehyde. 
Harmful by inhalation and ingestion. May cause burns. May cause sensitisation by inhalation and skin contact. Do not breathe vapours. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not mix with bleaching agents (bleach type) or sulphites. Keep out of reach of children. Use biocidal products with care.